Our products

Non-shrink hydraulic binder, fast bonding and setting (2-3 minutes), for securing lugs, sub-frames, security grilles, sanitary wares and pipes, and stopping small water leaks.
For indoor and outdoor use.

• Apply with trowel.

Non-shrink hydraulic binder, medium-fast bonding and setting (10-15 minutes). Ideal for filling in chases and cavities, anchoring junction boxes, securing sub-frames, embedding PVC conduit at floor level and for making good facades.
For indoor and outdoor use.

• Apply with trowel.

Hydraulic binder, ultra-fast boding and setting, for stopping pressurized water leaks.
For indoor and outdoor use.

• Apply by hand.

Grey hydraulic binder for building applications. Ideal for all uses were a normal grey cement is needed.

• Use: as binder for plasters, mortars and screeds.

White hydraulic binder for building applications. Ideal for all uses were a white cement is needed.

• Use: as binder for plasters and mortars.

Special hydraulic binder, used to create high quality plasters for restoration work in coastal and mountain areas, mix­ed with standard aggregates of grain size up to 3 mm. The plasters obtained afford optimum porosity, breathability and flowability.
For indoor and outdoor use.

• Mix 25 kg Poly Bond + 75 - 90 aggregates selected to grading curve
• Use: as binder for plasters and mortars.

Premixed scratch coat mortar, breathable, applied by hand, for plasters, containing hydraulic binders, selected aggregates and no water soluble salts. Given its high capacity for adhesion to substrates, ideal as bonding coat for premixed plasters applied to extruded bricks, cement blocks, pumice, pressed bricks, concrete, stone, etc. Application suitable for both new and old substrates.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Premixed mortar, fibre-reinforced, applied by hand, formulated with hydraulic binders. Ideal for laying extruded bricks, tufa blocks, pressed bricks, natural stone, also for scratch coat and render, traditional masonry, screeds, filling of chases and cracks, anchoring junction boxes, embedding PVC conduit at floor level and for making good facades. Suitable for thick bed applications.
For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel.

Premixed mortar, fibre-reinforced, fast-bonding multi-purpose, applied by hand. Ideal for laying extruded bricks, tufa blocks, pressed bricks, natural stone, also for scratch coat and render, traditional masonry, screeds, filling of chases and cracks, anchoring junction boxes, embedding PVC conduit at floor level and for making good facades. Suitable for thick bed applications.
For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel.

Premixed plaster, fibre-reinforced, breathable, superior technology, formulated with hydraulic binders. Compared to traditional plasters, provides optimum workability and ease of application, both by hand and mechanically. Applied to substrates such as cotto, tufa, extruded brick, pumice, concrete and mixed masonry. Intended in particular for restoration work.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed mortar, superior technology, high breathability, thin bed, formulated with special hydraulic binders and additives allowing use of the product to prepare optimum base coats, but also to level off irregularities on traditional plasters, pumice partition walls, tufa, and compact mixed masonry.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with stainless steel mason's or plasterer's trowel and finish with sponge float.

Premixed mineral skim coat, fine grain size, superior technology, breathable, high quality. Ideal for use on Buffa Intonaco T70, Intonaco Rais, etc., and on traditional plasters, for skimming new and non-absorbent walls, even if slightly uneven. Suitable as a surface for coloured finishes, following preparation with appropriate primers, such as silicate, siloxane and acrylic coatings. Can be reinforced with Rete PB Fine coated mesh. Intended for use as skim coat, or as finish coat if protected with Peg 600.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float

Rheoplastic and thixotropic mortar, fibre-reinforced, resistant to abrasion. Suitable for repairing reinforced concrete and reconstruction of missing parts; also particularly effective for filling chases and cracks. Can be applied in coats up to 4 cm thick.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Ready to use screeding mortar mix, superior technology, fluidized, fibre-reinforced, compensated shrinkage, for screeds of 4 to 10 cm, laying floors, ceramic tile, stoneware, high-end floor finish cycles, etc. Ease of application when levelling. Ideal for radiating systems. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with Buffa Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge.

Ready to use concrete mix. Enables quick application and guarantees long term durability. Ideal for laying screeds and effecting repairs, inspection chambers, ground beams, floor slabs, etc.
Also ideally suitable for filling door and window frames, chases, covering PVC pipes, galvanized pipes and ferrous materials, on walls and floors alike.
For indoor and outdoor use.

• Application: the mortar should be mixed to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge.

Premixed mortar for masonry work. Notable mechanical strength makes this product especially suitable for the erection of masonry structures in seismic zones.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Premixed mortar of superior technology, for masonry work. Notable mechanical strength makes this product especially suitable for the erection of masonry structures in seismic zones.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Premixed heat and sound-insulating mortar containing lightweight aggregates and specific additives, for masonry using extruded bricks or insulating blocks. Resulting masonry structures are thermally homogeneous, with no thermal bridging.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Premixed mortar, fibre-reinforced, ideal for covering PVC pipes at floor level, levelling dwarf walls built of stone, tufa, extruded brick, also for screeds, and filling in holes and chases in floors, etc.
For indoor and outdoor use.

• Application: the mortar should be mixed to a uniform and fluid consistency; use a drum mixer for best results. Finish with straightedge or float

Premixed mortar, breathable, coloured and waterproof, for bedding fair faced brickwork and stone claddings.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with trowel.

Premixed mortar, superior technology, breathable, coloured and waterproof, for pointing fair faced brickwork and stone claddings.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with trowel.

Fine white premixed mortar, breathable, superior technology. Ideal for applying skim coats on prefabricated concrete panels and traditional plasters.
For indoor and outdoor use.

• Maximum grain size: 0.3 mm.
• Apply with stainless steel trowel

Premixed thermal skim coat, good filler, fibre-reinforced, breathable, superior technology. Ideal for application over Intonaco Rais Thermo, Intonaco Rais Semithermo, Intonaco Libeccio Thermo, skimming and insulating inside and outside walls exposed to cold, and as base coat for silicate and siloxane mineral finishes.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with trowel.

Premixed mortar, fibre-reinforced, breathable, decorative, natural, formulated with hydraulic binders. Applied over traditional plasters.
For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with stainless steel trowel

Premixed adhesive mortar, intended specifically for laying cellular concrete blocks.
For indoor and outdoor use.

• Apply with stainless steel serrated spreader.

Premixed mortar, thixotropic, shapeable, fibre-reinforced, medium-fast setting, for repairing, filling, making good. Ideal for complete or partial restoration of cornices and other mouldings on historic buildings.
For indoor and outdoor use.

• Apply with trowel.

Premixed mortar, thixotropic, shapeable, fibre-reinforced, medium-fast setting. Ideal for repairs and making good, levelling up, filling holes and channels in substrates, and renewing corner edges. Suitable for thicknesses from 1 to 30 mm. Total hardening time 5-15 hours, depending on thickness.
For indoor and outdoor use.

• Apply with mason's trowel and smooth plasterer's trowel, stainless steel

Premixed mortar, intended for traditional laying of concrete and natural stone floors, thick bed. Ideal for fixing roof tiles and ridge tiles. Best alternative to conventional mortar.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply by hand with smooth or serrated spreader and trowel.

Premixed scratch coat mortar, breathable, applied by hand, for plasters, containing hydraulic binders, selected aggregates and no water soluble salts. Given its high capacity for adhesion to substrates, ideal as bonding coat for premixed plasters applied to extruded bricks, cement blocks, pumice, pressed bricks, concrete, stone, etc. Application suitable for both new and old substrates.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Premixed scratch coat mortar, breathable, providing key for plasters, containing hydraulic binders, selected aggregates and no water soluble salts. Given its high capacity for adhesion to substrates, ideal as bonding coat for premixed plasters applied to extruded bricks, cement blocks, pumice, pressed bricks, concrete, stone, etc. Application suitable for both new and old substrates.
For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel or projector.

Premixed scratch coat mortar, salt-resistant, breathable, providing key for plasters, containing hydraulic binders, selected aggregates and no water soluble salts. Given its high capacity for adhesion to substrates, ideal as bonding coat for Macrocell and Macrosan macroporous damp-resistant plasters, applied to extruded bricks, cement blocks, pumice, pressed bricks, concrete, stone, etc. Application suitable for both new and old substrates.
For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel or projector.

Ready to use one-part bonding coat, for the preparation of smooth substrates having little or no absorbency. Use on cement based substrates before applying plasters and skim coats.
For indoor and outdoor use.

• Apply with brush or roller.

Premixed plaster, breathable, formulated with hydraulic binders. For use on pumice, tufa, pressed brick, stone, extruded brick and cement.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed plaster, fibre-reinforced, superior technology, breathable, formulated with hydraulic binders. For use on pumice, tufa, pressed brick, stone, extruded brick and cement.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed plaster, water-repellent, superior technology, breathable, formulated with hydraulic binders. For use on pumice, tufa, pressed brick, stone, extruded brick and cement.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed plaster, fibre-reinforced, breathable, superior technology, formulated with hydraulic binders. Compared to traditional plasters, provides optimum workability and ease of application, both by hand and mechanically. Applied to substrates such as cotto, tufa, extruded brick, pumice, concrete and mixed masonry. Intended in particular for restoration work.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed heat-insulating plaster, fibre-reinforced, high breathability, superior quality, containing special hydraulic binders and specific additives. Used for insulating new and old masonry, of whatever nature and depth. Also provides a dehumidifying action.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed semi-thermal plaster, fibre-reinforced, high breathability, superior quality, containing special hydraulic binders and specific additives. Used for insulating new and old masonry, of whatever nature and depth. Also provides a dehumidifying action.
For indoor and outdoor use.

• When used on concrete, apply Primer Aggrappante or Malta Rinzaffo beforehand.
• Apply with trowel or projector.

Premixed thermal skim coat, good filler, fibre-reinforced, breathable, superior technology. Ideal for application over Intonaco Rais Thermo, Intonaco Rais Semithermo, Intonaco Libeccio Thermo, skimming and insulating inside and outside walls exposed to cold, and as base coat for silicate and siloxane mineral finishes.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with trowel.

Premixed skim coat containing quartz, breathable, superior technology, for use on two-coat plaster, textured prefabricated concrete panels and other new non-smooth cementitious substrates. Mixed with Bond LT51, offers superior bonding power, elasticity and waterproof properties, with adhesion also to old cementitious substrates, walls and floors, wa­ter tanks and pools­, and for restoration work.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, fibre-reinforced, breathable, superior technology, for use on two-coat plaster, textured prefabricated concrete panels and other new non-smooth cementitious substrates. Mixed with Bond LT51, offers superior bonding power, elasticity and waterproof properties, with adhesion also to old cementitious substrates, walls and floors, wa­ter tanks and pools­, and for restoration work.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, medium-fine, breathable, superior technology. For use on two-coat plaster, prefabricated concrete panels, cementitious substrates. Ideal for filling and skimming new and old walls, optimum also for skimming walls that have been painted previously. Suitable for use on non-absorbent finishes and coatings. Can be reinforced with Rete PB coated mesh. Intended for use as skim coat, or as finish coat if protected with Peg 600.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, waterproof, one-part, superior technology, breathable. Protects cementitious surfaces on facades from carbonation and is suitable for repair work on deteriorated reinforced concrete. For use on cementitious substrates, two-coat plaster, prefabricated concrete panels and Thermo Panels. Ideal for making good and skimming new and old walls. Especially suitable for restoration work. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, two-part, superior technology. For use on two-coat plaster, prefabricated concrete panels, cementitious substrates, reinforced concrete pools and tanks. Ideal also for cementitious floors and screeds. Intended in particular for restoration work. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Mix parts A+B
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, superior technology, breathable, good filler. For use on traditional or premixed plasters. Suitable also for smoothing out irregularities in substrates of new facades.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with smooth stainless steel trowel and finish either with trowel or with sponge float

Premixed skim coat, water-repellent, superior technology, breathable, filler. For use on traditional or premixed plasters. Designed for use as skim or setting coat for indoor and outdoor walls of period and modern villas. Thanks to its power of adhesion to the substrate, can be used on indoor walls and ceilings both new and old, including painted surfaces.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with smooth stainless steel trowel and finish with plastic float.

Premixed mineral skim coat, breathable, high quality. Ideal for skimming base coats onto new substrates such as traditional plaster or premixed plasters, typically Buffa Intonaco T70, Intonaco Rais, etc.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral skim coat, white, breathable, good filler, high quality. Ideal on new substrates such as traditional plaster or premixed plasters, typically Buffa Intonaco T70, Intonaco Rais, etc. Mixed with Bond LT 51, offers enhanced adhesion, elasticity and waterproof properties. Intended for use as skim coat, or as finish coat if protected with Peg 600.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral skim coat, breathable, high quality. Suitable for use on traditional and premixed plasters, prefabricated concrete panels, new and old substrates. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral skim coat, superior technology, breathable, good filler, high quality. Ideal for use on Buffa Intonaco T70, Intonaco Rais, etc., and on traditional plasters, for skimming new and non-absorbent walls, even if slightly uneven. Suitable as a surface for coloured finishes, following preparation with appropriate primers, such as silicate, siloxane and acrylic coatings. Can be reinforced with Rete PB coated mesh. Intended for use as skim coat, or as finish coat if protected with Peg 600.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with smooth stainless steel trowel and finish with sponge float or plastic float.

Premixed mineral skim coat, medium grain size, superior technology, breathable, good filler, high quality. Ideal for use on Buffa Intonaco T70, Intonaco Rais, etc., and on traditional plasters, for skimming new and non-absorbent walls, even if slightly uneven. Suitable as a surface for coloured finishes, following preparation with appropriate primers, such as silicate, siloxane and acrylic coatings. Can be reinforced with Rete PB coated mesh. Intended for use as skim coat, or as finish coat if protected with Peg 600. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float or plastic float.

Premixed mineral skim coat, fine grain size, superior technology, breathable, high quality. Ideal for use on Buffa Intonaco T70, Intonaco Rais, etc., and on traditional plasters, for skimming new and non-absorbent walls, even if slightly uneven. Suitable as a surface for coloured finishes, following preparation with appropriate primers, such as silicate, siloxane and acrylic coatings. Can be reinforced with Rete PB Fine coated mesh. Intended for use as skim coat, or as finish coat if protected with Peg 600. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral skim coat, fibre-reinforced, superior technology, breathable, good filler, high quality. Ideal for application over Intonaco Rais Thermo, Intonaco T70, Intonaco T70 Fibrorinforzato and traditional plasters, and for skimming new and old walls with slightly uneven surfaces. Suitable also for previously painted non-absorbent surfaces and as preparation for silicate and siloxane coatings, etc. Intended for use as skim coat, or as finish coat if protected with Peg 600.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with smooth stainless steel trowel and finish with sponge float or plastic float.

Premixed coloured glue mortar, breathable, good filler Ideal for Rivestire line coatings and over traditional and premixed plasters. Mixed with Bond LT 51 and water, offers enhanced adhesion, flexibility and waterproof properties. For indoor and outdoor use.

• Maximum grain size: 1.8 mm.
• Apply with smooth stainless steel trowel.

Ready to use paste of superior quality, for application over previous plastic resin coatings and over traditional plasters Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

Ready to use paste featuring superior technology, for application over previous plastic resin coatings and over traditional plasters, plastic, wood, ceramic tiles, marble, etc. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

Premixed mineral stucco plaster, white, superfine, breathable, high value, superior quality, containing powdered marble, hydraulic binders and specific additives. Used before painting on new substrates, wall and ceiling, and is extremely easy to apply. Ideal on Traspirol Primavera, Tonachino Libeccio, Finitura Libeccio Riempitiva, Stucco Coc AS, Traspirol Super Fine AS and Rasox Plus F. For indoor use.

• Apply with smooth stainless steel trowel.

Premixed mineral plaster, white, good filler, breathable, high value, superior quality, containing powdered marble, hydraulic binders and specific additives. Used before painting on new substrates, wall and ceiling, and is extremely easy to apply. Ideal on Traspirol Primavera, Tonachino Libeccio, Finitura Libeccio Riempitiva and Rasox Plus F. For indoor use.

• Apply with smooth stainless steel trowel.

Premixed mineral stucco plaster, white, superfine, breathable, high value, superior quality, containing powdered marble, hydraulic binders and specific additives. Thanks to its power of adhesion to the substrate, can be used on walls and ceilings both new and old, including painted surfaces. Extremely easy to apply. Used indoors, the stucco finish can be painted or left natural giving the look of marble; if used outdoors, protection with Peg 600 is recommended. Ideal for Buffa products: Rasox Plus F, Traspirol Primavera, Tonachino Libeccio, Finitura Libeccio Riempitiva and Stucco Coc NX AS. For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

Premixed mineral stucco plaster, white, good filler, breathable, high value, superior quality, containing powdered marble, hydraulic binders and specific additives. Used on both walls and ceilings, over Intonaco T70, Intonaco Rais, Intonaco Rais Semithermo, on Rasox Plus Fibro, Rasox Plus M e Rasox Plus F skim coats, and for filling cracks and crazing. Ideal for levelling walls, on substrates either painted previously or ready for painting. If 'marmorino' effect is required, apply two coats of Stucco Coc NX.
For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

White paste stucco plaster, satin finish, fine, breathable, containing powdered marble, micronized fillers and specific additives. Used as base coat on all substrates, old and new, rough or smooth, wall or ceiling, even over existing paint. Ideal for emulsion painting.
For indoor use.

• Apply with smooth stainless steel trowel.

White paste stucco plaster, satin finish, good filler, containing powdered marble, micronized fillers and specific additives. Used as base coat on all substrates, old and new, rough or smooth, wall or ceiling, even over existing paint. Ideal for emulsion painting. For indoor use.

• Apply with smooth stainless steel trowel.

White paste stucco plaster, satin finish, good filler, medium-fine, containing powdered marble and specific additives. Used as base coat for emulsion paints and products of the Contrasti Line. Suitable also for use on drywall material. For indoor and outdoor use.
Adhesion assured on all substrates, old and new, rough or smooth, wall or ceiling, even over existing paint.

• Apply with smooth stainless steel trowel.

White paste stucco plaster, satin finish, good filler, containing powdered marble and specific additives. Used as base coat for emulsion paints and products of the Contrasti Line. Adhesion assured on all substrates, old and new, rough or smooth, wall or ceiling, even over existing paint. For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

Paste stucco plaster, medium-fine, containing powdered marble and polymer binder. Used on new and old substrates, existing painted surfaces included, providing a satin finish. Can be used as base coat for emulsion paints and products of the Contrasti Line. For indoor and outdoor use.

• Apply with smooth stainless steel trowel.

Premixed mineral plaster replicating old-style sand-finishes, traditional, breathable, formulated with hydraulic binders, medium-fine grain size. For indoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral plaster replicating old-style sand-finishes, breathable, formulated with hydraulic binders, medium-fine grain size. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral plaster replicating old-style sand-finishes, fibre-reinforced, breathable, formulated with hydraulic binders, medium-fine grain size. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral plaster replicating old-style sand-finishes, fibre-reinforced, breathable, good filler, formulated with hydraulic binders, medium-fine grain size. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral plaster replicating old-style sand-finishes, superfine, high breathability, formulated with hydraulic binders. For indoor use.

• As base coat, use Traspirol Primavera or Simpaty Nuovo Extra.
• Maximum grain size: 0.1 mm.
• Apply with smooth stainless steel trowel.

Premixed mineral plaster replicating old-style sand-finishes, superfine, good filler, high breathability, formulated with hydraulic binders. For indoor use.

• As base coat, use Traspirol Primavera or Simpaty Nuovo Extra.
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel.

Premixed mineral plaster replicating old-style sand-finishes, formulated with hydraulic binders, medium-fine grain size. Ideal for interior finishes creating period look. For indoor use.

• Visual effect: medium decorative matte finish.
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed mineral plaster replicating old-style sand-finishes, superior quality, formulated with hydraulic binders, medium-fine grain size. Ideal for finishes creating period look.
For indoor and outdoor use.

• Visual effect: medium decorative matte finish.
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Mineral plaster replicating old-style sand-finishes, ready to use paste, medium-fine grain size, formulated with lime putty. Ideal for period and contemporary base coats and finishes.
For indoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Mineral plaster replicating old-style sand-finishes, ready to use paste, good filler, medium-fine grain size, formulated with lime putty. Ideal for period and contemporary base coats and finishes. Visual effect: smooth satin finish. For indoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel.

Mineral plaster replicating old-style sand-finishes, ready to use paste, high breathability, superfine, formulated with lime putty. For indoor use.

• As base coat, use Max Tonachino.
• Apply with smooth stainless steel trowel.

Glass fibre reinforcing mesh, certified ETAG 004 and ITC-CNR, coated, alkali-resistant, for skimming plasters and for Buffa waterproofers: Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex, Coper Bond Elast, Coper Paint Finish AS, etc., and for Thermovita Cladding System.

• Roll: 50 linear m.
• Weight: 160 g/m²

Glass fibre reinforcing mesh, for skimming plasters and for Buffa waterproofers: Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex, etc., and for Thermovita Cladding System..

• Roll: 50 linear m.
• Weight: 160 g/m²

Glass fibre reinforcing mesh, coated, alkali-resistant, for waterproofing and skimming applications. Used with Buffa liquid membranes: Coper Gum, Coper Flex Fibro, Coper Bell, Elasto Paint, Coper Paint, Coper Paint Plus, Coper Paint Finish AS, Coper Therm, etc.

• Roll: 100 linear m.
• Weight: 60 g/m²

Glass fibre reinforcing mesh, coated, alkali-resistant, for premixed plasters.

• Roll: 50 linear m.
• Weight: 116 g/m²

Glass fibre reinforcing mesh, alkali-resistant, for embedding in cementitious screeds, normal and technical, and for wall plasters.

• Roll: 50 linear m.
• Weight: 305 g/m²
• Bore: 40x40 mm.

Electrically welded reinforcing grid, hot-dip galvanized. Strong protection against corrosion induced by chemicals contained in the cement mix. Ideal for floor screeds and walls.

• Gauge: ø 2 mm.

Polyethylene sheet providing separation membrane between concrete and screed, guarantees effective vapour barrier function. Protects floors from rising damp.

• Roll: 4x70 linear m.
• Thickness: 200 microns.

Pierced and galvanized sheet metal guide rail, length 2.80 m, for premixed cementitious or NHL plasters.

PVC drip rail, plasterable, ideal for protection of horizontal corner edges when installing the Thermovita Cladding System.

Galvanized sheet metal angle bead, length 2.80 m, for cementitious or NHL plasters.

Aluminium angle bead, length 2.80 m, for cementitious or NHL plasters.