Our products

Water-based and water-repellent liquid formulated with silanes, designed to prevent rising damp in masonry.

• Apply with low pressure gravity feed system.

Solvent-based and water-repellent liquid formulated with siloxanes, superior technology, designed to prevent rising damp in masonry.

• Apply with low pressure gravity feed system.

Transparent salt-resistant primer for the treatment of masonry affected by rising damp and efflorescence. For indoor and outdoor use.

• Apply with brush, roller or spray.

N.B. Consult the technical bulletin before applying.

Deep penetrating protective stabilizer, ready to use. Guarantees waterproof and tough finish for substrates. Ideal for crumbling screeds and cementitious substrates. For indoor and outdoor use.

• Apply with brush, roller or spray.

Deep penetrating protective stabilizer, ready to use, formulated with modified silicates. Ideal for application to surfaces such as powdery plasters and eroded substrates, and for treating mineral coatings affected by efflorescence. For indoor and outdoor use.

• Apply with brush, roller or spray.

Deep penetrating protective stabilizer, transparent and breathable, ready to use, superior technology, formulated with modified silicates. Ideal for application to surfaces such as powdery plasters and eroded substrates, fair-faced concrete, natural stone, tufa, etc. Ideal for restoration work. For indoor and outdoor use.

• Apply with brush, roller or spray.

Fluid cement mortar for rubble core walls. Also suitable for repairing cracks and crevices caused by structural degradation.

• Apply with mixer and low pressure pump.

Premixed scratch coat mortar, salt-resistant, breathable, providing key for plasters, containing hydraulic binders, selected aggregates and no water soluble salts. Given its high capacity for adhesion to substrates, ideal as bonding coat for Macrocell and Macrosan macroporous damp-resistant plasters, applied to extruded bricks, cement blocks, pumice, pressed bricks, concrete, stone, etc. Application suitable for both new and old substrates. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel or projector.

Premixed scratch coat, salt-resistant, high quality, breathable, formulated with hydraulic binders. Affords optimum adhesion on substrates such as extruded bricks, concrete blocks, pumice, pressed bricks, concrete, stone, etc. Ideal for Macrocell and Macrosan macroporous damp-proofing plasters. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel or projector.

Rheoplastic mortar, fibre-reinforced, high strength, for plastering and screeding over concrete. Suitable also for structural reinforcement and repair of masonry, embedding electrically welded and galvanized grid mesh. Designed for application in thicknesses of up to 30 - 40 mm per coat. Ideal as base coat for Koboss damp-proofing treatment.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel or projector.

Macroporous damp-proofing and salt-resistant plaster, used in specific treatment cycles for the repair of damp masonry involving the complete removal of old plaster where deteriorated beyond recovery.
For indoor and outdoor use.

• As salt-resistant mortar, use Malta Rinzaffo Antisale, Rinzaffo Libeccio Antisale or Cover 100 Antisale.
• Recommended minimum thickness: 2 cm.
• Apply with trowel.

Macroporous salt-resistant plaster, strong damp-proofing action, fibre-reinforced, superior technology, used in specific treatment cycles for the repair of damp masonry involving the complete removal of old plaster where deteriorated beyond recovery. Also has notable insulation and sound-absorbent properties. For indoor and outdoor use.

• As salt-resistant mortar, use Malta Rinzaffo Antisale, Rinzaffo Libeccio Antisale or Cover 100 Antisale.
• Recommended minimum thickness: 3 cm.
• Apply with trowel or projector.

Salt-resistant microporous skimming plaster, fibre-reinforced, colour pearl grey, used in specific cycles for the treatment of damp concrete and masonry without the need to remove old plaster. To be applied thinly over existing cement render when still uniformly flat and cohesive, and over reinforced concrete or fibre-reinforced filling mortars, having first cleaned the affected parts of the surface with a suitable power grinder. Koboss is applied in two coats, embedding Rete PB coated mesh in the first coat. Thereafter, use Koboss 0.6 or Koboss 0.3 and complete the cycle with a breathable finish. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with stainless steel float.

Microporous finishing skim coat, colour white, used in specific cycles for the treatment of damp concrete and masonry. For use after the application of Koboss base coat.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with stainless steel float.

Microporous finishing skim coat, colour white, used in specific cycles for the treatment of damp concrete and masonry. For use after the application of Koboss base coat or Koboss 0.6. For indoor and outdoor use.

• Maximum grain size: 0.3 mm.
• Apply with stainless steel float.

Two-part salt-resistant microporous skimming plaster, fibre-reinforced, colour white, used in specific cycles for the treatment of damp concrete and masonry without the need to remove old plaster. To be applied very thinly over existing cement render when still uniformly flat and cohesive, and over reinforced concrete or fibre-reinforced filling mortars, having first cleaned the affected parts of the surface with a suitable power grinder. Koboss 2C is applied in two coats, embedding Rete PB coated mesh in the first coat. Thereafter, use Koboss 0.3 and complete the cycle with a breathable finish. For indoor and outdoor use.

• Mix parts A+B
• Maximum grain size: 2 mm.
• Apply with brush or smooth stainless steel trowel.

Microporous finishing skim coat, colour white, used in specific cycles for the treatment of damp concrete and masonry. For use after the application of Koboss base coat or Koboss 0.6. For indoor and outdoor use.

• Maximum grain size: 0.3 mm.
• Apply with stainless steel float.

Glass fibre reinforcing mesh, certified ETAG 004 and ITC-CNR, coated, alkali-resistant, for skimming plasters and for Buffa waterproofers: Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex, Coper Bond Elast, Coper Paint Finish AS, etc., and for Thermovita Cladding System.

• Roll: 50 linear m.
• Weight: 160 g/m²

Glass fibre reinforcing mesh, coated, alkali-resistant, for strengthening pillar and wall plasters.

• Roll: 50 linear m.
• Weight: 190 g/m²

Electrically welded reinforcing grid, hot-dip galvanized. Strong protection against corrosion induced by chemicals contained in the cement mix. Ideal for floor screeds and walls.

• Gauge: Ø 2 mm

Breathable solvent.-based barrier coat formulated with siloxanes. Guarantees water-repellent and protective barrier for plasters, cotto, natural stone and fair-faced concrete. Ideal for restoration work and as protection for Buffa mineral finish coats. For indoor and outdoor use.

• Apply evenly with brush, roller or spray.

Deep-penetrating breathable barrier coat, formulated with special water soluble acrylic polymers. Treated substrates are guaranteed impervious to water and oils, resistant to abrasion, and flexible. Suitable for the protection of cotto, natural stone, pressed brick and fair-faced concrete, as base coat for acrylic coatings and as primer when encapsulating asbestos cement with Coper Max, etc.

• Apply with brush, roller or spray.

Transparent water-based primer, mould-resistant, or protecting interior and exterior surfaces from the formation of mould, fungi and algae. Guarantees adhesion of products AB3 Antimuffa and AB3 Antimuffa Thermo.

• Dilute with water at a rate of 1:3 maximum.
• Apply with brush or roller.

Ready to use liquid disinfestant, resistant to moulds and bacteria, for application to walls, brick, concrete, etc.

• Apply with brush or sponge.

Breathable emulsion paint, formulated specifically to prevent the formation of moulds and fungi on walls. For indoor use.

• Apply with brush, roller or spray.

Breathable emulsion paint, superior quality, insulating properties, formulated specifically to prevent the formation of moulds and fungi on walls. Also minimizes the difference in temperature between indoor environment and masonry, reducing heat loss to the exterior.
Ideal for bathrooms and kitchens. For indoor use.

• Apply with brush, roller or spray.

Ready-to-use paste skim coat, superior quality, for application over old plastic resin coatings and traditional plasters. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Apply with stainless steel trowel or spreader.

Ready to use fibre-reinforced elastomer filler and skim coat, for waterproofing bathrooms, showers and kitchens; can also be used on drywall. Top Elast Fibro sets to a rough finish, providing a firm key for special adhesives used to fix ceramic, stoneware and glass mosaic tiles, marble, etc. Ideal for waterproofing outside walls exposed to the elements and pitched roofs, providing an optimum bond with the mortar used for roof tiles, and on existing ceramic wall and floor tiles that require skimming in preparation for tiling over. When used for waterproofing purposes, apply Giunto Bond, Angolare B10 and Angolare B11 beforehand.
For indoor and outdoor use.

• Apply with stainless steel trowel or spreader.
• N.B. Protect with Elasto Paint on facades.

Waterproof elastomer paint, for crazed external facades. Ideal for the protection of outside walls, plastered and skimmed surfaces or crazed finishes, and fair-faced reinforced concrete structures. Suitable for the protection of Coper Bond Elast and Top Elast Fibro on facades.

• Apply with brush, roller or spray.