Our products

Ready to use screeding mortar mix, superior technology, lightweight, thermo-acoustic, breathable, normal drying with compensated shrinkage, thickness 4 to 10 cm. Ideal for floors, roofs, terraces, etc. Provides optimum substrate for waterproof membranes and ceramic tiles laid with cement-based adhesives. Reduces footfall noise.
For indoor and outdoor use.

• Application: mix with water to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically.

Ready to use screeding mortar mix, medium-fast drying, compensated shrinkage, thick­ness 4 to 10 cm, for laying floors, ceramic tiles, fully vitrified stoneware, etc.. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to give consistency of damp earth; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge and float, and with rotary power float if appropriate.

Ready to use screeding mortar mix, fibre-reinforced, high strength, medium-fast drying, compensated shrinkage, thick­ness 4 to 10 cm, for laying floors, ceramic tiles, fully vitrified stoneware, etc. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to give consistency of damp earth; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge and float, and with rotary power float if appropriate.

Ready to use screeding mortar mix, superior technology, fast drying, compensated shrinkage, thickness 4 to 10 cm, for quick installation of floors, ceramic tiles, fully vitrified stoneware, etc.. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to give consistency of damp earth; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge and float, and with rotary power float if appropriate.

Ready to use screeding mortar mix, superior technology, fluidized, fibre-reinforced, compensated shrinkage, thickness 4 to 10 cm, for laying floors, ceramic tile, stoneware, high-end floor finish cycles, etc.. Ease of application when levelling. Ideal for radiating systems. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge.

Ready to use screeding mortar mix, fast-drying, superior technology, fluidized, fibre-reinforced, compensated shrinkage, thickness 4 to 10 cm, for laying floors, ceramic tile, stoneware, high-end floor finish cycles, etc.. Ease of application when levelling. Ideal for radiating systems. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Application: mix with water to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge.

Hydraulic binder for screeds with compensated shrinkage, thickness 3 to 10 cm, for laying floors, ceramic tiles, fully vitrified stoneware, etc.. If a smooth surface is required for laying wood strip flooring, fitted carpet, linoleum, etc., preparation with our Paviplan is recommended.
For indoor and outdoor use.

• Mix 20 kg Pavi Dry AD with 100/110 kg selected aggregates of up to 8 mm grain size.
• Application: mix with water to give consistency of damp earth; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge and float, and with rotary power float if appropriate.

Ready to use self-levelling screed, normal drying, compensated shrinkage, thickness 3 to 6 cm, for quick installation of ceramic tile, fully vitrified stoneware and marble floors, but also fitted carpet, parquet. linoleum, etc., by virtue of its smooth surface. Improves thermal conductivity. Particularly suitable for radiating systems. For indoor use. N.B. As adhesive, use Duraflex Speciale.

• Application: the mix should have the consistency of a fluid mortar; accordingly, use mixing equipment designed exclusively for mechanical applications.

Premixed coloured screed, two-part formulation, high strength and flexibility, medium-fast drying, compensated shrinkage, thickness 4 to 10 cm, for quick installation of floors. Can be reinforced with Griglia PB grid. Dry after eight days approx. For indoor and outdoor use.

• Mix parts A+B
• Visual effect: white, coloured or ground terracotta.
• Apply with straightedge and stainless steel float or rotary power float, and finish with polisher.

Premixed self-levelling compound for floor screeds of 2 to 7 mm thickness, when laying parquet, fitted carpet, linoleum, ceramic tiles, stoneware, etc.. For indoor use.

• Application: the mortar should be mixed to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with smooth or notched stainless steel trowel.

Premixed self-levelling compound for screeding irregular substrates, thickness 3 to 10 mm, when laying floors with parquet, fitted carpet, linoleum, ceramic tiles, stoneware, etc.. For indoor use.

• Application: the mortar should be mixed to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with smooth or notched stainless steel trowel.

Premixed skim coat containing quartz, two-part, superior technology. For use on two-coat plaster, prefabricated concrete panels, cementitious substrates, reinforced concrete pools and tanks. Ideal also for cementitious floors and screeds. Intended in particular for restoration work. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Mix parts A+B
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Special quartz adhesive, frost-proof, with high bonding power, for laying and fixing once-fired and twice-fired floor tiles and wall tiles. Mixed with Duraplus, suitable for laying and fixing non-absorbent tiles. For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Professional quartz adhesive incorporating superior technology, highly thixotropic and zero vertical slippage. Allows tiling of walls from the bottom up, and diagonally. Suitable for laying and fixing small size once/twice-fired ceramic and fully vitrified stoneware tiles on cementitious substrates. For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Professional adhesive of superior quality, containing quartz, frost-proof and thixotropic, with zero vertical slippage on cementitious screeds and plasters. Allows fixing of wall tiles and claddings from the top down and diagonally: once/twice-fired ceramic, fully vitrified stone­ware­, natural or manufactured stone. Durabond Universale combines selected aggregates and specific additives in a product of high quality. For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Professional adhesive of superior quality, containing quartz, frost-proof, ultra-flexible, high bonding power, waterproof, zero vertical slippage, optimum for laying and fixing ceramic tiles, fully vitrified stoneware, glass mosaic, natural or manufactured stone, for pools, terraces, balconies, industrial floors and heated screeds. Ideal for tiling-over, and for exterior facades. For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Special adhesive, superior technology, frost-proof. waterproof and deformable, high strength, for laying and fixing ceramic tiles, marble, fully vitrified stoneware, on balconies and terraces, in pools and showers. Suitable for tiling-over, and for cladding exterior facades. For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Special quartz adhesive, high bonding power, flexible, designed specifically for laying once/twice-fired ceramic and stoneware tile floors on Pavimax Flu Autolivellante self-levelling screed. Also ideal for drywall and gypsum substrates. For indoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Special high performance adhesive, superior technology, one-part, self-wetting, formulated with hydraulic binders and special additives, suitable for laying ceramic tile floors even with non-absorbent body, and for tiling-over. Suitable in particular for laying fully vitrified stoneware on normal or heated screeds; tile backs are wet completely without the need for buttering. For indoor and outdoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 15 mm.

Professional adhesive, superior technology, fast setting, frost-proof, contains quartz. Suitable for laying once/twice-fired ceramic and fully vitrified stone­ware­ tiles on cementitious screeds, and for tiling-over. Durarapid combines selected aggregates and specific additives in a product of high quality.
For indoor and outdoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Special adhesive, superior technology, frost-proof, strong adhesion and flexibility, for laying and fixing marble, natural or manufactured stone, glass mosaic, fully vitrified stoneware, etc. Ideal for tiling-over; when used on exterior facades, buttering of tile backs is recommended.
For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Special adhesive, frost-proof, containing quartz, high quality, thick bed, for laying con­crete bricks, marble, cotto, natural, artificial and manufactured stone, Volcanic Monolayer. Ideal for bricks with structured back, special pieces and irregular substrates
For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 15 mm.

Special adhesive, superior technology, frost-proof, containing quartz, high quality, thick bed, flexible, for laying fully vitrified stone­ware, concrete bricks, marble, cotto, natural or manufactured stone, Volcanic Monolayer. Ideal for bricks with structured back, special pieces and irregular substrates and for tiling-over.
For indoor and outdoor use.

• On gypsum surfaces, use Primer GS.
• Apply with stainless steel notched trowel.
• Thickness of bed up to 20 mm.

Elastomer latex for improving flexibility, bonding power, performance and deformability of our cement-based adhesives.

Water-based acrylic adhesive, ready to use paste providing optimum flexibility and zero vertical slippage. Ideal for laying and fixing all kinds of ceramic floor and wall tiles, and glass mosaic, even on gypsum and drywall without using primers, and on all substrates commonly used in the building sector.
For indoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Universal acrylic adhesive, ready to use paste providing optimum flexibility. Ideal for fixing Thermo Panel components, vinyl floors and walls, mosaics, fitted carpet, linoleum, expanded polystyrene, parquet, etc. Suitable for use on cementitious, gypsum and drywall substrates. Perfect for D-I-Y projects.
For indoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 5 mm.

Two-part epoxy adhesive, anti-acid, zero vertical slippage. Ideal for laying and fixing ceramic tiles of all types and sizes. Especially suitable for thermal pools and industrial environments.
For indoor and outdoor use.

• Apply with stainless steel notched trowel.
• Thickness of bed up to 10 mm.

Two-part epoxy adhesive, thick bed, superior technology, anti-acid, zero vertical slippage. Ideal for fixing stone and marble to walls. For indoor and outdoor use.

• Apply with suitable stainless steel notched trowel.
• Thickness of bed up to 25 mm.

Special quartz adhesive-skim coat, supplied as powder, superior technology, ultra high strength, flexible. Ideal for filling and skimming new and old walls, fixing and skimming panels of the Thermovita Cladding System, and polystyrene cornices.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm
• Apply with smooth or notched stainless steel trowel.
• N.B. When used for Thermovita cladding panels, apply the first skim coat incorporating Rete PB mesh

Special quartz adhesive-skim coat, supplied as powder, superior technology, thick bed, ultra high strength, flexible. Ideal for filling and skimming new and old walls, fixing and skimming panels of the Thermovita Cladding System, and polystyrene cornices.
For indoor and outdoor use.

• Maximum grain size: 2 mm
• Apply with smooth or notched stainless steel trowel.
• N.B. When used for Thermovita cladding panels, apply the first skim coat incorporating Rete PB mesh.

Adhesive-skim coat supplied as paste, for mixing with cement, superior technology, ultra high strength, good flexibility and bonding power. Ideal for filling and skimming new and old walls, and for fixing and skimming polystyrene panels of the Thermovita Cladding System.
For indoor and outdoor use.

• Mix Poly Cem 2C with 325 grey or white cement, equal proportions.
• Apply with smooth or notched stainless steel trowel.
• N.B. When used for Thermovita cladding panels, apply the first skim coat incorporating Rete PB mesh.

Ready to use fibre-reinforced elastomer filler and skim coat, for waterproofing bathrooms, showers and kitchens, can also be used on drywall. Top Elast Fibro sets to a rough finish, providing a firm key for special adhesives used to fix ceramic, stoneware and glass mosaic tiles, marble, etc. Ideal for waterproofing outside walls exposed to the elements and pitched roofs, providing an optimum bond with the mortar used for roof tiles, and on existing ceramic wall and floor tiles that require skimming in preparation for tiling over. When used for waterproofing purposes, apply Giunto Bond, Angolare B10 and Angolare B11 beforehand.
For indoor and outdoor use.

• Apply with stainless steel trowel or spreader.
• N.B. Protect with Elasto Paint on facades.

Professional cement based grout, superfine, for filling gaps of up to 4 mm between floor and wall tiles. Special additives and selected aggregates ensure a waterproof and mechanically tough finish with optimum resistance to moulds, unaffected by fungi and bacteria. Mixed with Fill Plus, offers enhanced adhesion, elasticity and waterproof properties. Suitable for pools.
For indoor and outdoor use.

• Apply with squeegee.
• Colours: white, light grey, bahama beige, cement grey, charcoal grey, tobacco, black.

Professional cement based grout, medium-fine, for filling gaps of 2 to 12 mm between floor and wall tiles. Special additives and selected aggregates ensure a waterproof and mechanically tough finish with optimum resistance to moulds, unaffected by fungi and bacteria. Mixed with Fill Plus, offers enhanced adhesion, elasticity and waterproof properties. Suitable for pools.
For indoor and outdoor use.

• Apply with squeegee.
• Colours: white, light grey, cement grey, manhattan, charcoal grey, green, black, brown, antique pink, cotto, ivory, champagne, amber, bahama beige, tobacco, jasmine, magnolia, hazelnut, jade, bermuda blue, red, yellow, crocus, musk, ice mint.

Professional cement based grout, medium grain, for filling gaps of 4 to 20 mm between floor and wall tiles. Special additives and selected aggregates ensure a waterproof and mechanically tough finish with optimum resistance to moulds, unaffected by fungi and bacteria. Mixed with Fill Plus, offers enhanced adhesion, elasticity and waterproof properties. Suitable for pools.
For indoor and outdoor use.

• Apply with squeegee.
• Colours: light grey, cement grey, charcoal grey,

Elastomer latex, suitable for increasing the ­strength, flexibility and waterproof properties of our grouting products: Colorfill for gaps up to 4 mm, Colorfill for 2 to 12 mm, and Pavifill for 4 to 20 mm. Ideal­ for pools.

• Use instead of gauging water.

Professional two-part epoxy grout giving highly waterproof and mechanically tough finish with optimum resistance to moulds, unaffected by fungi and bacteria. Also resistant to acid and chemical agents, and therefore suitable when grouting gaps of 2 to 15 mm in tiling for industrial premises (food, wine, pharmaceutical, chemical), laboratories, hospitals and pools. Easy to apply, optimum cleanability.

• Mix parts A+B.
• Apply with squeegee; clean and finish with hard cellulose sponge.
• Colours: white, cement grey, manhattan, charcoal grey.